Home / Blog / Xactimate Estimate Review: 5 Checks for U.S. Property Owners

Xactimate Estimate Review: 5 Checks for U.S. Property Owners

Property estimate beside exterior condition photos

An Xactimate estimate still needs a focused, documentation-based review before you accept it. Check the scope, quantities, attachments, and regional pricing against your own photos and records. If material items are missing, gather evidence, ask for a written explanation, and consider a reinspection or a professional second opinion.


TL;DR:

  • Xactimate uses regional price lists across more than 460 geographic regions, so verify the estimate’s location and price list date before judging unit costs.
  • Compare sketches with line item quantities, unit types, and photos; mismatches, omitted roof components, and repair entries where replacement is warranted deserve written questions.
  • Pair dated wide views and detailed photos with annotated measurements, itemized contractor bids, and permits, then request a written explanation for each denied item.
  • Organize evidence before depositing an initial settlement check, because the NAIC warns that doing so can make challenging the original scope harder.
  • Seek a professional review when damage is complex, scope items were denied, or the inspection left unresolved questions; gather the original estimate and insurer correspondence.

Vectorclaimsolutions
Review Your Estimate With Clear Documentation
Vector Claim Solutions presents a documentation-first approach to insurance claims, helping property owners examine estimates with clear explanations and practical guidance.

Visit Vector Claim Solutions

Table of Contents

What should you check first in an Xactimate estimate?

You can run this check after the estimate arrives. Start with the items most likely to change the total.

  • Confirm the scope-of-loss description lists every damaged area, not only the most visible one.
  • Match sketch measurements and quantities to your photos and property documents.
  • Verify unit types and line items, and look for permit or code-related entries.
  • Find which regional price list was used and confirm it matches your location.
  • Make sure photos, sketches, and contractor bids are attached and tied to specific line items.

Pro Tip: Print the estimate and mark each line item with the photo or bid that supports it. Anything you cannot connect to evidence is where questions usually begin.

An adjuster’s report is a starting point, not a final answer. The Insurance Information Institute notes that adjusters typically rely on replacement-cost computer programs built on regional averages, and it advises policyholders to compare the report with independent estimates and documentation before accepting a settlement.

How does Xactimate build an estimate?

Knowing what sits behind the totals makes the review far easier. Verisk describes Xactimate as an estimating suite that uses regional price databases, sketches, macros, and tools such as XactScope to generate line-item estimates across more than 460 geographic regions. For a deeper walkthrough, see our guide on how adjusters calculate repair estimates.

Here is what each part of the file does:

  • Price lists: Standardized line items are priced by geography, so the wrong region or an outdated list can move the total.
  • Sketches and quantities: Room dimensions and roof measurements drive the math behind each unit price.
  • Unit types: Square feet, linear feet, and “each” change how a quantity is multiplied.
  • Macros and XactScope: These can add items automatically, which saves time but can also add or omit entries you did not expect.

The estimate is only as reliable as the scope-of-loss documentation behind it. A thin scope produces a thin estimate, no matter how good the software is.

Which errors and red flags show up most often?

These are the problems we see most often when reviewing estimates for hail, wind, and water losses in states such as Nebraska, Iowa, Colorado, Texas, and Florida.

  1. Omitted items such as flashing, decking, or secondary structure elements, often hidden behind vague scope language.
  2. Quantities that do not match between the sketch and the line items.
  3. Repair line items where replacement is warranted, or missing tear-off and disposal on a roof.
  4. The wrong regional price list, or no allowance for code upgrades.
  5. Attachments that do not clearly support a line item, such as photos with no context or timestamp.

Consider a roof estimate that lists shingles but no drip edge or underlayment. The total looks complete, yet the estimate may not account for everything needed to complete the repair. Differences in construction estimates are normal, and the Insurance Information Institute’s claims guide notes that policies often include appraisal clauses for exactly that reason.

Timing matters: The NAIC cautions that depositing an initial settlement check can make it harder to challenge the original scope, so organize your evidence before you deposit.

What documentation strengthens an estimate review?

Documentation drives claim outcomes because it lets a reviewer tie each disputed item to something verifiable.

  • Dated photos and video: Wide shots show location, and close-ups show the damage itself.
  • Annotated sketches or laser-measured diagrams that reconcile with the Xactimate quantities.
  • Independent contractor bids that line up item by item with the disputed entries.
  • Permits, inspection reports, and receipts that support code or replacement items.

The NAIC’s post-disaster guidance also recommends gathering photos and written contractor bids and being present during the adjuster’s inspection.

Pro Tip: Name folders by room or roof slope, and put the line-item number in each photo filename. A reviewer can then confirm your evidence in seconds.

Photos grouped with matching estimate items

For more on reading and challenging a document like this, see our guide to insurance claim estimates.

What should you do next if the estimate looks low?

Work from the simplest steps to the formal ones.

  1. Assemble your photos, sketches, bids, and the full estimate file in one place.
  2. Ask the insurer for a written explanation of any denied portion and submit your own documentation with your request.
  3. Request a reinspection, citing the specific missing or mismeasured items. Our guide to demanding a reinspection explains how.
  4. Read your policy’s appraisal or arbitration clause, and review NAIC guidance on dispute paths. Our dispute walkthrough covers the steps.
  5. Plan for the mortgage lender. Lenders are commonly named on checks for structural damage and often hold proceeds, releasing funds by verified project milestones.
  6. Consider a professional review when the scope is complex, items were denied, or you want an evidence-first audit. Our decision rule on hiring a public adjuster can help you weigh it.

Why we start every estimate review with the paperwork

An estimate is a conversation between your evidence and the insurer’s file, and conversations go better when both sides can point to the same facts. When we organize photos, measurements, and bids against each line item, vague disagreements become specific questions an adjuster can answer. That same organization can help make questions about a reinspection or appraisal more specific. We would rather spend our first hours on your documentation than on arguing from general impressions.

— Vector

Get a second opinion on your Xactimate estimate

If you want an independent look at an estimate, we offer a documentation-first claim review built on the same checklist described above. A claim review can help you examine your estimate and supporting documentation.

It is most useful for owners with disputed scope, complex damage, or an inspection that left questions. Before you reach out, gather your photos, the original Xactimate file, insurer correspondence, and your declarations page. You can request a claim review when you are ready.

Vectorclaimsolutions

FAQ

How do I download Xactimate Desktop?

Xactimate is a Verisk product, and access is generally tied to a licensed account rather than a public download. Verisk’s product page describes the desktop, online, and mobile platforms and is the place to start.

How hard is Xactimate to learn?

Basic navigation is approachable, but accurate estimating takes practice with sketches, unit types, and line-item libraries. Property owners rarely need to learn it, because reviewing the finished estimate against your documentation covers most of what matters.

What is similar to Xactimate?

Other claims estimating tools exist, and Xactimate is one platform used to prepare estimates. Whatever software produced the estimate, the same review applies: confirm scope, quantities, and pricing against your evidence.

Can a public adjuster review my estimate?

Yes. According to the NAIC, public adjusters research and substantiate damage, prepare documentation, and negotiate on behalf of the policyholder. They are distinct from company adjusters and contractors.

Sources